
WORX WU135T 12V 50Nm 2-Speed Brushless Impact Drill with 2x 2.0Ah Batteries
Hammer Drills
No downloads available yet
Contact the supplier if you need a datasheet, certificate, or another technical document.

Delivery Information
Payment Options
Buyer Protection
The WORX WU135T.9 is the bare-tool version of the 12V brushless 2-speed hammer drill. At just 146mm long and 0.98kg bare, it works comfortably inside cabinets, under ceilings and in tight corners. The brushless motor delivers up to 50N·m of torque with two no-load speed ranges of 0-500 / 1800rpm and an impact rate of up to 0-6970 / 28,000bpm. Three operating modes - driver, drill and hammer drill - cover wood, metal and masonry, while SMART CLUTCH stops the motor the moment the clutch releases in screwdriving mode, reducing cam-out, over-tightening and gear wear. A 10mm metal ratcheting chuck, 18+1+1 torque settings, a 3-LED battery gauge, a wide-beam LED work light and a soft-grip ergonomic handle make it a practical choice for renovation, furniture assembly, door and window fitting and bathroom hardware installation. This model is the bare tool (WU135T.9): battery and charger are not included - it runs on the same WORX 12V battery platform.
Driver, drill and hammer-drill modes combine with 18+1+1 torque settings so output matches the material: hammer mode for masonry, rotary drilling for wood and metal, and clutched driving for screws. A high/low gear selector switches between low-speed torque and high-speed drilling.
In screwdriving mode the motor cuts out as soon as the set torque is reached and the clutch disengages, cutting ratcheting noise and gear wear while preventing over-driven or stripped screws.
| Model | WU135T.9 (bare tool) |
|---|---|
| Rated voltage | 12V |
| Motor | Brushless |
| Max torque | 50 N·m |
| No-load speed | 0-500 / 1800 rpm (2 gears) |
| Impact rate | 0-6970 / 28000 bpm |
| Max chuck capacity | 10 mm (metal ratcheting chuck) |
| Max drilling capacity | Wood 30 mm / Steel 10 mm / Masonry 8 mm |
| Torque settings | 18+1+1 |
| Modes | Driver / Drill / Hammer drill |
| Dimensions | 146 × 168.6 × 58 mm |
| Weight | 0.98 kg (bare tool) |