Name: WORX WU132T 12V 160Nm Brushless Impact Driver & Wrench Kit
Brand: Worx
SKU: WORX-WU132T
Price: 800 HKD
Availability: InStock

The WORX WU132T is a 12V cordless brushless impact driver and impact wrench in one body. Its 2-in-1 output head carries both a 1/4" hex quick-change chuck and a 1/2" square drive, so driving screws, running nuts and drilling can be switched instantly without carrying two tools. A brushless motor with an integrated gear-shaft assembly delivers steady torque output, while three electronic speed settings run at 1600 / 2900 / 3600 rpm with 80 / 110 / 160 N·m of forward torque; reverse torque peaks at 200 N·m, enough for the M8–M16 standard bolts met in everyday service work. At just 144mm long and about 0.8kg, it suits electromechanical repair, furniture installation, plumbing and electrical maintenance, and vehicle servicing in tight spaces. This kit ships with two 2.0Ah lithium batteries and a 1.5A charger so one pack can charge while the other works.

WORX WU132T 12V brushless impact driver and wrench used one-handed on a steel bracket bolt

Features & Benefits

WORX WU132T ring LED work light and three-speed specification chart

2-in-1 output head

The head accepts both 1/4" hex bits and 1/2" square-drive sockets, so screwdriving, nut running and drilling share a single tool — no mid-job tool swap and less weight to carry.

Three speed settings matched to the job

Speed 1: 1600rpm / 80N·m / 1800ipm for fine fastening. Speed 2: 2900rpm / 110N·m / 3500ipm for general work. Speed 3: 3600rpm / 160N·m / 4200ipm for high-torque removal, with up to 200N·m in reverse.

WORX WU132T three-speed chart of no-load speed, torque and impact rate

Brushless motor with an integrated gear-shaft assembly for stable torque, low wear and long service life.
Reverse auto-stop: hold the trigger in reverse until all three indicators light, and the tool stops turning once the nut is loose, reducing the risk of dropped fasteners at height.
Ring-shaped shadowless LED with a wide beam and three brightness levels for clear vision in dark areas.
Only 144mm long and about 0.8kg — genuinely one-handed in confined spaces.
Variable-speed trigger with instant stop, plus an electromagnetic forward/reverse selector.
On-board battery fuel gauge and an accessory mounting point for a belt hook or bit holder.

Specifications

Model	WU132T
Battery platform	12V Li-ion
Motor	Brushless
Output head	1/4" hex quick-change chuck + 1/2" square drive (2-in-1)
No-load speed	0–1600 / 2900 / 3600 rpm (3 speeds)
Max forward torque	80 / 110 / 160 N·m (3 speeds)
Max reverse torque	200 N·m
Impact rate	0–1800 / 3500 / 4200 ipm
Max fastening capacity	Machine screws M4–M8; standard bolts M8–M16; high-tensile bolts M6–M12
Dimensions	144 x 55 x 187 mm
Weight	0.8 kg
Work light	Ring-shaped shadowless LED, 3 brightness levels
Other features	Reverse auto-stop, battery fuel gauge, variable speed, electromagnetic direction selector, accessory mounting point

What's in the Box

WORX WU132T 12V brushless impact driver & wrench x1
12V 2.0Ah lithium battery x2
1.5A charger x1

No downloads available yet

Contact the supplier if you need a datasheet, certificate, or another technical document.

Reviews & Q&A

No reviews yet. Be the first to review this product.

Features & Benefits

2-in-1 output head

The head accepts both 1/4" hex bits and 1/2" square-drive sockets, so screwdriving, nut running and drilling share a single tool — no mid-job tool swap and less weight to carry.

Three speed settings matched to the job

Brushless motor with an integrated gear-shaft assembly for stable torque, low wear and long service life.
Reverse auto-stop: hold the trigger in reverse until all three indicators light, and the tool stops turning once the nut is loose, reducing the risk of dropped fasteners at height.
Ring-shaped shadowless LED with a wide beam and three brightness levels for clear vision in dark areas.
Only 144mm long and about 0.8kg — genuinely one-handed in confined spaces.
Variable-speed trigger with instant stop, plus an electromagnetic forward/reverse selector.
On-board battery fuel gauge and an accessory mounting point for a belt hook or bit holder.

Specifications

Model	WU132T
Battery platform	12V Li-ion
Motor	Brushless
Output head	1/4" hex quick-change chuck + 1/2" square drive (2-in-1)
No-load speed	0–1600 / 2900 / 3600 rpm (3 speeds)
Max forward torque	80 / 110 / 160 N·m (3 speeds)
Max reverse torque	200 N·m
Impact rate	0–1800 / 3500 / 4200 ipm
Max fastening capacity	Machine screws M4–M8; standard bolts M8–M16; high-tensile bolts M6–M12
Dimensions	144 x 55 x 187 mm
Weight	0.8 kg
Work light	Ring-shaped shadowless LED, 3 brightness levels
Other features	Reverse auto-stop, battery fuel gauge, variable speed, electromagnetic direction selector, accessory mounting point

What's in the Box

WORX WU132T 12V brushless impact driver & wrench x1
12V 2.0Ah lithium battery x2
1.5A charger x1

Reviews & Q&A

No reviews yet. Be the first to review this product.

JACO自營旗艦店

WORX WU132T 12V 160Nm Brushless Impact Driver & Wrench Kit

JACO自營旗艦店

Reviews & Q&A

Similar products

WORX WU132T.9 12V 160N·m Brushless Impact Driver / Wrench (Bare Tool)

WORX WU132X 12V Brushless Motor Impact Wrench

WORX WU132X.9 12V Cordless Impact Wrench (Bare Tool)

WORX WE203 12V 140N·m Brushless Impact Driver with 2 x 2.0Ah Batteries

WORX WU292DS.9 20V 150Nm Brushless Impact Driver (Bare Tool)

WORX WU927 12V Brushless Drill Driver & Impact Driver Combo Kit

Recently viewed

WORX WU132T 12V 160Nm Brushless Impact Driver & Wrench Kit

JACO自營旗艦店

Reviews & Q&A